Loading...
Home > Products > Medical > Dental Washer Disinfectors > Smeg Dental Washer Accessories

Smeg Dental Washer Accessories


Get Price
Looking for a price?
Ask Question

Smeg Dental Washer Accessories

Basic Trolleys

 

Basic Upper Trolley, 45cm

This basic upper trolley with spray arm holds baskets and supports for surgical instrument treatment.  Compatible with WD2145 series.  Item Code: D-CS1.

 

Basic Lower Trolley, 45cm

This basic lower trolley holds baskets and supports for surgical instrument treatment.  Compatible with WD2145 series.  Item Code: D-CS2.

 

Basic Upper Trolley, 60cm

This basic upper trolley with spray arm holds baskets and supports for surgical instrument treatment.  Compatible with WD1160 and WD4060 series.  Item Code: CS1-1.

 

Basic Lower Trolley, 60cm

This basic lower trolley holds baskets and supports for surgical instrument treatment.  Compatible with WD1160 and WD4060 series.  Item Code: CS2.

  

Washing Handpieces

To meet specific needs of injection washing and disinfection of dental instruments, Smeg has designed these handpiece accessories to enable the outer washing of the instruments as well as delicately and thoroughly washing the inside ducts by purging the washing solution into them.

 

Hand Piece Washing Support, 45cm

This hand piece washing support, suitable for the WD2145 series, is supplied with a standard set consisting of 12 silicone rings and 12 filters.  Made of stainless steel.  Item Code: D-SM12.

 

Hand Piece on Trolley, 45cm

D-SM12 hand piece washing support must be placed on a D-CS1 trolley as show below.  Item Code: D-SM12E + D-CS1.

 

Hand Piece Washing Support, 60cm

This hand piece washing support, suitable for the WD1160 and WD4060 series, is supplied with a standard set consisting of 8 silicone rings, 8 filters and 6 nozzles.  Made of stainless steel.  Item Code: D-SM8.

 

Hand Piece on Trolley

D-SM8 hand piece washing support must be placed on a CS1-1 trolley as show below.  Item Code: D-SM8 + CS1-1.

  

Supports and Brackets

 

Instrument Basket with Handles and Cover

This instrument basket is suitable for dental instruments.  Made of stainless steel, 2x2mm mesh.  Item Code: CSMICRO1.

 

Fine Drawn Mesh Basket with Cover

This fine mesh basket is suitable for housing rotary cutters and small instruments.  Made of stainless steel.  Item Code: CSMICRO2 and CSMICRO3 (different sizes).

  

 

Basket with Cover

This instrument basket with cover is suitables for various instruments.  Made of stainless steel, cover mesh: 5x5mm and basket mesh: 3.3mm.  Item Code: CSK1/6.

 

Instrument Basket with Handles

This instrument basket is suitable for dental instruments.  Made of stainless steel, 5x5mm mesh.  Item Code: CSK1/3.

 

Instrument Basket with Handles

This instrument basket is suitable for dental instruments, for WD1050D series only..  Made of stainless steel, 5x5mm mesh.  Item Code: CSK2.

 

Basket with Handles

This basket with handles is suitable for various dental instruments.  Made of stainless steel, 3x3mm mesh.  Item Code: D-CM1.

 

Support Basket for Various Instruments

This support basket is ideal to place various dental instruments in the upright position.  This basket should be placed on a washer disinfector trolley; D-CS1 or D-CS2.  Made of stainless steel.  Item Code: D-SV.

 

Basket Support

This support basket holds two CSMICRO1 or two CSK1/6 or two IMS half units and should be positioned on the upper trolley; D-CS1 or CS1.  Made of stainless steel.  Item Code: D-SB2.

 

Basket Support

This support basket holds three CSMICRO1 or three CSK1/6 or three IMS half units and should be positioned on a standard lower trolley; D-CS2 or CS2.  Made of stainless steel.  Item Code: D-SB3.

 

Tray / Container Support

This support tray is suitable for 10 basins/trays.  It should be placed on a standard bottom trolley; D-CS2 or CS2.  Made of stainless steel.  Item Code: D-ST10.

 

Container Cover Support

This support tray is suitable for 8 tray covers and should be placed on a standard bottom trolley; D-CS2 or CS2 on the lower level only..  Made of stainless steel.  Item Code: D-SCT8I

 

Tray Support

This support tray is suitable for 11 trays and should be placed on a standard lower trolley; D-CS2 or CS2 on the lower level only.  Made of stainless steel.  Item Code: D-ST11.

 

Tray Support

This support tray which holds up to 16 trays and can be positioned on a standard lower trolley; D-CS2 or CS2 on the lower level only.  Made of stainless steel.  Item Code: D-ST16.

 

Pliers Support Rack

This support racks is suitable for pliers and forceps needing to be placed in a vertical position.  Made of stainless steel.  Item Code: SPD.

 

Support for Container Covers

This support rack holds up to 8 tray covers, for use with D-CS1 trolley.  Made of stainless steel.  Item Code: D-SCT8S.

 

Support for IMS Units

This support rack holds up to 6 IMS units or 12, IMS half units.  Must be positioned on a standard lower trolley; D-CS2 or CS2.  Made of stainless steel.  Item Code: D-SIMS.

 

Stainless Steel Base

This stainless steel frame with detergent compartment, allows the washer disinfector loading level to be raised up to an ergonomic user height, around 70cm from the ground.  Item Code: B6040L.

 

Stainless Steel Frame

This stainless steel frame allows the washer disinfectors loading levels to be raised to an ergonomic user height, around 70cm from ground.  The open frame also allows for easy access / cleaning under the washer disinfector.  Item Code: T6040.